Toggle Nav
My Cart 0
Search
Automotive
Switch to:
  • Sign In
    • Automotive Shop
    Switch to:
    Length

    Custom AN8 PTFE Braided Fuel Oil Hose Lines

    £8.94 £7.45
    5.00
    100% of 100
    1 Review
    • HEL Official 1 Year Warranty
      Official Warranty

    • Hose specifications can be found in the product description. You can add heatsleeve at the end.

    • All our aluminium hose end fittings are reusable and also swivel, allowing you to orientate them yourself to the angle you need. You can add a male or banjo adapter below once you've made your selection.

    • All our adapters are removable and reusable.

    • You can leave this end open by selecting 'None'.

    • All our adapters are removable and reusable.

    • Use the vertical lines on the diagram to help you calculate the length. The length is measured from seat to seat, except for banjo adapters, which are measured from the center of the banjo eye.

      Length tolerance is ±5mm.

    • For maximum thermal protection, you can add flexible HEL Extreme 1200°C Heatsleeve. The HEL logos are spaced approximately 300mm apart.

    • If you have any special requirements, please let us know.

    £8.94 £7.45
    In Stock
    Quantity
    Description

    You can now create your own custom braided PTFE fuel, oil and coolant hoses, professionally assembled to your exact specifications and designed for motorsport use.

    Designed for using inside a vehicle as the PTFE inner doesn't let fuel and oil vapour escape into the cabin.

    We expertly assemble each hose using lightweight 6061-T6 reusable aluminium fittings, attached directly to high-performance braided hose with a reinforced PTFE inner, protected with a layer of braided stainless steel or black nylon cotton.

    Each custom hose is quality inspected before dispatch and will arrive ready to fit to your latest project.

    Applications
    Fuel (including VP Racing and E85), oil, coolants and methanol.

    Fitting Thread Size
    -8 AN JIC (3/4" x 16 tpi)

    Hose Specifications
    Stainless Steel Braided Black Nylon Cotton Braided
    Internal Material PTFE PTFE
    Inside Diameter 11mm 11mm
    Outside Diameter 14mm 14mm
    Operating Temperature -70°C–250°C (-94°F–482°F) -70°C–250°C (-94°F–482°F)
    Operating Pressure 2500 PSI 2500 PSI
    Burst Pressure 8000 PSI 8000 PSI
    Disclaimer
    Customer Reviews
    Write Your Own Review
    Write a Review
    Rating

    © 1997–2024 Hose Solutions Limited. Registered in England & Wales No. 06692101. VAT No. GB912910544.

    Terms Privacy Cookies Modern Slavery Social Media
    We accept VISA, Mastercard, Maestro and PayPal.